1) MAP MOUNTED ON SPRING ROLLER

The map is laminated then installed on a spring roller. Multiple maps can be placed on a spring roller. This will allow you to pull down the map as needed and hide it away! The map in the front will have a white flip bar. Pull down both maps using the pull-down bar to view the front map. To view the back map, you can flip the front map over the back of the spring roller using the flip bar.

The map is laminated then mounted on wood rails at the top and bottom of the map. The front side of each rail is finished with a black or walnut finish. The sides and back are unfinished. Sawtooth hardware is fixed to the back of the top rail, so it’s ready to hang. Use stickers or wet-erase markers on your map.

3) LAMINATED MAP

Paper maps are printed then run through our laminator that secures 1.7mil-thick satin-gloss-finished lamination on the front and back. Use map stickers and wet-erase markers on your map.

4) PAPER MAP

Paper finishing is the most economical option. Most maps are printed on premium 36lb paper. Waterproof paper is also available for functional maps that may be used outdoors.

The map is laminated then installed on a spring roller with a steel backboard. Multiple maps (1 to 8) can be mounted on a spring roller. This allows you to pull down the map/s as needed and hide it away when you are done. The map in the front will have a white flip bar. Pull down your map/s using the pull-down bar to view the front map. To view the back map, you can flip the front map over the back of the spring roller using the flip bar.